MIL-T-62110 Trucks, Maintenance: With Rotating Hydraulic Derrick, 32,000 To 44,500 Gvw, 4X2, 4X4, 6X4, And 6X6, CommercialThis specification covers maintenance trucks with a rotating and telescoping hydraulic derrick. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-T-62110G

TABLE VI.  Type I and III dimensions (inches).

*

TABLE VII.  Type II dimensions (inches).

*

3.5.1  Bumper and platform extension.  A combination bumper and platform extension shall be provided.  A safety tread steel plate shall be provided on top of the platform extension. The combination bumper and platform extension shall be capable of storing the tamper, pole jack carrier, and the highway warning kit in accessible locations.

3.5.1.1  Stirrup steps.  Stirrup steps shall be furnished on the combination bumper and platform extension.  A grab handle shall be installed to assist personnel in entering the body loadspace.

3.5.1.2  Access steps.  Access steps and grab handles shall be furnished on each side of type I and type III vehicles.  The access steps shall be between the body and the chassis cab and shall provide for entrance and exit to and from the turret control console or dual controls, as applicable, or, for type III, for access to the body loadspace.  The steps shall be provided with safety tread steel plate.

27