MIL-T-62110 Trucks, Maintenance: With Rotating Hydraulic Derrick, 32,000 To 44,500 Gvw, 4X2, 4X4, 6X4, And 6X6, CommercialThis specification covers maintenance trucks with a rotating and telescoping hydraulic derrick. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-T-6211OG

*          3.1.1.1  Treatment and painting.  The vehicle shall be treated and painted in accordance with MIL-STD-1223.  The exterior color shall be gloss yellow, matching color chip No. 13538

of FED-STD-595.  Extruded, pultruded, molded or spiral wound derrick components shall not be painted.

*          3.1.1.2  Markings and data plates.  As specified by the procuring activity for the appropriate military service (see 6.2), identification markings and data plates shall be in accordance with MIL-STD-1223.  When specified (see 6.2), concealed markings shall be furnished.

3.1.1.2.1  Caution plates.  Caution plates shall be furnished and mounted in conspicuous locations near the lower and upper controls and in the driver's compartment.  Caution plates shall conform to composition A (class 1 or 2) or composition C of MIL-P-514.  At least the following information shall appear on the plates:

(a)        DERRICK MUST BE IN STOWED POSITION WHILE VEHICLE IS BEING MOVED.

(b)        RATED AERIAL BASKET LOAD, HYDRAULIC OUTRIGGERS DOWN, NOT IN EXCESS OF                      POUNDS.

(c)     INSPECT AERIAL BASKET LEVELING SYSTEM.

(d)     MAXIMUM VOLTAGE DERRICK AND BASKET(S) WILL WITHSTAND

VOLTS AC.

(e)     OVERALL TRAVEL HEIGHT WHEN DERRICK IS IN STOWED POSITION. (f)     BASKET LINERS MUST BE INSTALLED WHEN OPERATING NEAR

ELECTRICAL LINES.

(g)        DO NOT PERMIT DIRECT CONTACT OF BASKET(S) TO GROUND WHEN OPERATING NEAR ELECTRICAL LINES.

(h)        MAXIMUM SIDE SLOPES,                    DEGREES.  MAXIMUM ASCENDING SLOPES,                      DEGREES.  MAXIMUM DESCENDING SLOPES,

                       DEGREES.

(i)      DO NOT DRILL HOLES IN BOOM OR BASKET TO DRAIN WATER, DUMP

OUT WATER.

(j)        BOOMS AND BASKET(S) MUST BE KEPT CLEAN AND FREE OF DAMPNESS.

3.1.1.2.2  Instruction plates.  Plates showing schematics of all valves, valve controls, equipment, body lubrication, and complete operating instructions for operating the vehicle aerial equipment shall be fastened on the inside of one of the curbside vertical cabinet doors.  Each control lever shall be marked with a plate depicting the function of the control.  Individual markings shall be adjacent to each control.  Plates and markings shall conform to composition A (class 1 or 2) or composition C of MIL-P-514.

3.1.1.2.3  Warning signs.  Warning signs or labels, as recommended by the

Manufacturers of Aerial Devices and Digger Derricks Council, shall be furnished and attached.

*          3.1.1.3  Rustproofing.  When specified (see 6.2), the vehicle shall be rustproofed in accordance with FED-STD-297.  When specified (see 6.2), tropical rustproofing in accordance with FED-STD-297 shall be furnished.

7