MIL-T-62110 Trucks, Maintenance: With Rotating Hydraulic Derrick, 32,000 To 44,500 Gvw, 4X2, 4X4, 6X4, And 6X6, CommercialThis specification covers maintenance trucks with a rotating and telescoping hydraulic derrick. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-T-62110G

(h) Complete installation drawings are available to the procuring activity.

3.2 General design.

3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.

3.2.2 Air pollution control. The vehicle shall comply with the EPA Regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicle Engines in effect on the date of manufacture. In addition, vehicles destined for California shall comply with the State of California regulations governing air pollution control in effect on the date of manufacture.

* 3.2.3 Sound level. The interior sound level shall not exceed 84db(A). The vehicle exterior drive-by sound level shall conform to EPA Noise Emission Standards for Transportation Equipment - Medium and Heavy Trucks.

3.2.4 Safety. The vehicle and rotating derrick shall comply with ANSI A92.2 and all

OSHA requirements, including OSHA 1926.556.

3.2.5 Curb weight. The curb weight shall include the weight of the chassis and cab, with all attachments, accessories, equipment (but excluding tools and augers), body, derrick and a full complement of fuel, lubricants, and coolant.

3.2.6 Gross vehicle weight. The gross vehicle weight (GVW) shall consist of curb weight, operator weight (computed at 175 pounds), and a payload to provide not less than the specified GVW; or a payload of not less than 2,500 pounds, whichever provides the greater GVW.

3.2.6.1 Weight distribution. The distribution of the GVW for the purpose of establishing suspension, axle, and tire capacities shall be determined with the payload uniformly distributed over the vehicle body load area. In addition, front suspension, axle, and tire capacities shall be not less than 9,000 pounds, measured at the ground.

3.2.7 Ratings. The vehicle and component ratings shall be the manufacturer's published ratings. Vehicle and component ratings shall not be raised to meet the requirements of this specification. When published ratings are not available, verification of ratings shall be available to the engineering office of the procuring activity. Minimum GVW ratings shall conform to

1.2.1 for the specified class of vehicle. In addition, the actual GVW rating of the vehicle furnished shall exceed the minimum GVW specified when required to provide a payload of not less than 2,500 pounds evenly distributed over the load area.