MIL-T-62223 Truck, Mobile Blood Donor And Component Laboratory, Tilt Cab, Diesel Or Gasoline Engine Driven, 24,000 Pounds Gvw, 4X2, CommercialThis specification covers a completely self-contained, mobile, self-propelled unit, designed to serve as a combination mobile blood component processing laboratory and three-bed donor facility. The vehicle shall be diesel or gasoline engine driven, four-wheel, two rear wheel drive, having minimum gross vehicle weight GVW of 24,000 pounds and shall be equipped with a tilt cab, a 30 kilowatt kW auxiliary generator and a 4 kW auxiliary generator. The body shall be fully air conditioned and heated. Vehicles procured under this specification are commercial items which shall be warranted by the manufacturer as specified in procurement documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37

MIL-T-62223B(AT)

shall be capable of adjustment without binding or interference. The fan blower heaters shall be securely mounted, shall be free of gaps, exposed electrical wiring, and exposed insulation. The fan blower shall be capable of operating without malfunction, vibration or undue noise.

3.7.11 Plumbing installation. The installed plumbing system (appliances, fixtures, devices and associated equipment) shall be capable of functioning satisfactorily without water leaks, excessive vibration or undue noise. All plumbing equipment shall be securely mounted and shall show no evidence of damage (scratches, dents, chipping). All drainage plumbing shall be installed in a manner to prevent leakage caused by improperly assembled components.

3.7.12 Laminated surface of counters and desks. The counter and desk laminated surfaces (Formica) shall be securely installed, properly fitted, alined and level with the floor surface. Laminated surfaces shall be free of delamination, scratches, mars, uneven surfaces, rough edges, chipping and color fade. Counters, cabinets and desks shall be of rugged construction, properly alined and installed without any evidence of damage or deformation. Desk and cabinet drawers shall be fitted to provide ease of operation without binding, interference or excessive side movement during opening and closing.

3.7.13 Lounge seat and chairs. The built-in lounge seat with backrest and storage compartment under the lift-up seat shall be of sturdy construction and securely installed. The lounge seat and storage compartment surfaces shall be fitted and alined to provide blended surfaces and ease of operation of the lift-up seat. The catered chair and pedestal stool

(with backrest) shall be of sturdy construction providing even contract with the floor.

3.7.14 Upholstery and padding. Removable fitted pads covering donor beds and all upholstery shall be of durable material and securely installed. Upholstery shall meet the flammability requirements of FMVSS 302. The material shall be free of rips, tears, splits, color fade or stains and installed with a uniform fit. The upholstery and cover color shall be coordinated with the applicable area. Padding shall be of force distribution, breathable material and shall provide a comfortable, safe condition free of bumps, bulges or uneven surfaces.

3.7.15 Handrail installation. The safety handrail shall be securely mounted and shall be of rigid construction. The handrail surface shall be smooth, free of burrs, snags, scratches or rough areas.

3.7.16 Sound system installation. The sound system's three ceiling mounted speakers shall be securely mounted and fitted, free of gaps, openings, exposed wiring or exposed