and the rear of the front seat in
least five bows shall be
all positions of adjustment.
furnished and shall provide and
Legroom and space forward of
inside height of not less than
the front seat shall be equivalent
1780 mm (70 inches) between
to that provided ahead of the
the floor of the platform body
seat in a two-door standard cab.
and the tarpaulin cover at the
Three pairs of seat belts shall be
top. Not less than five evenly
installed for both the front and
spaced tiedown devices shall be
rear seats. Front outboard seats
provided on each side of the
shall have combination pelvic
vehicle body.
and upper torso restraint seat
BTC
TOOL COMPARTMENT, STEEL
belts.
Cab doors shall be
WITH LATCH
equipped with locks operable
When code BTC is specified, a
from inside the cab through
toolbox shall be provided. The
mechanical linkages, with both
toolbox shall provide for storage
front doors equipped with an
in addition to that required by
external key operated lock. Cab
3.4.16.
Minimum dimensions
doors shall have windows with
shall be 457 mm (18 in) by 457
crank
operated
window
mm (18 in) by 609 mm (24 in).
regulators. A rear window shall
A door opening size of not less
be provided.
Interior lighting
than 482 mm (19 in) by 330 mm
shall be provided. Safety grips
(13 in) shall be furnished. The
or grab handles shall be
toolbox shall be fabricated of not
provided at each door of the cab
less than 14 gage (2.657 mm)
to assist personnel climbing into
(0.1046 in) steel or of equivalent
the cab. The cab roof shall be
strength aluminum. The toolbox
of one-piece construction; or, if
shall be weatherproof and shall
welded, the roof shall give the
provide for locking. The toolbox
appearance of one piece, with
shall be mounted as close as
weld seams being continuous,
possible to the rear of the cab,
waterproof, and free of visible
on the curbside of the vehicle.
bumps or protrusions.
Full-
length drip moldings shall be
CC
CREW-CAB, 4 DOOR
mounted above the doors.
When code CC is specified, a
four-door, full width crew cab
CE
CAB, EXTENDED STYLE
shall be provided. The cab shall
When code CE is specified a
be
equipped
with
two
chassis OEM extended cab
upholstered, full width seats and
having an inside length (from
backs. The front seat shall be
firewall to back of cab) of not
adjustable. With the front seat
less than 78 In. nor more than
adjusted to the extreme forward
81 In. shall be provided.
position there shall be not less
that 760 mm (30 inches),
COE
TILT CAB
measured in a horizontal plane,
When code COE is specified, a
between the front of the rear
cab-over-engine (tilt cab) shall
seat back and the rear of the
be provided.
Provisions to
front seat back. A kick-space
facilitate cleaning the windshield
height of not less than 70 mm
shall be provided by means of a
(2.75
inches)
shall
be
bumper step, or bumper step
maintained between the floor
Page 42 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business