BDF
DIAMOND TREAD STEEL FLOOR
plank width shall
be
in
When BDF is specified, diamond
accordance
with
the
tread steel floors, one or two-
manufacturer's
piece, 3.2 mm (1/8 in) thick,
recommendation.
shall be provided for the body
BDS
DUMP STAKE BODY
with additional lateral support
When code BDS is specified, a
provided at the wheel wells.
dump stake/platform body shall
Two-piece floors shall be spliced
be provided. The stake/platform
longitudinally and completely
body shall be as specified in
welded the full length of the
3.5.3 through 3.5.3.5.2 for the
splice. One completely welded
vehicle class furnished, except
lateral steel floor splice is
the rear end racks shall be the
acceptable on bodies over 4880
manufacturer's standard swing
mm (16 feet) in length. When
type, hinged to each side rack.
specified diamond tread (code
The stake/platform body shall be
BDF2) or smooth (code BSF2)
adequately reinforced to provide
steel floor shall be minimum 5
support for an evenly distributed
mm (3/16 in) thick.
payload (GVW minus curb
BDF2
HEAVY DUTY FLOOR
weight and operator weight).
When BDF2 is specified, the
The body shall be mounted to a
body floor shall be diamond
hydraulic hoist unit.
Locking
tread steel, with a minimum
devices shall be provided near
thickness of 5 mm (3/16 in) and
the center of the rear racks to
additional
lateral
support
lock closed and to lock the racks
provided at the wheel wells.
to the body. All locking devices
Two-piece floors shall be spliced
shall be operable from the
longitudinally and completely
ground. A rear bumper is not
welded the full length of the
required. When a steel floor is
splice. One completely welded
furnished on dump stakes, it
lateral steel floor splice is
shall have a smooth finish.
acceptable on bodies over 4880
The body shall be mounted to
mm (16 feet) in length.
the hoist unit in accordance with
the
hoist
manufacturer's
BDF3
APITONG FLOOR
recommendations and shall be
When code BDF3 is specified,
reinforced, for added strength
apitong wood floors shall be
when necessary, for hoist
provided for the body.
operations. Rear body mounting
shall include hinges securely
BDF4
FLOORING-BED-RECYCLED
welded to the body longitudinal
MATERIAL
sills, a connecting cross shaft,
When option code BDF4 is
and a plate securely bolted to
specified, recycled tire and
the chassis main frame rails.
plastic plank boards, Rumber
A hydraulic conversion type
Materials Inc. or equal, shall be
hoist shall be furnished. Unless
furnished. Plank boards shall be
otherwise
specified,
the
a minimum of 1½ in. tongue and
conversion hoist shall have a
grove secured to bed frame with
minimum lifting capacity rating of
minimum ¼ in. stainless steel
Class D hoist for Class C
self tapping countersunk screws.
vehicles, Class E hoist for Class
The installation procedures and
D vehicles and Class F hoist for
Page 39 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business