MIL-T-62255 Truck Tractor, Yard Type, 4 X 2, Xm878This specification covers diesel engine driven, four-wheel, two rear wheel drive truck-tractor, yard type, with a one man half cab, having a minimum gross vehicle weight rating GVWR of 43,500 pounds and a gross combination weight rating GCWR of 100,000 pounds. Vehicles under this specification shall be procured only from a manufacturer who meets the standard commercial and commercially proven component criteria. Vehicles shall be warranted by the manufacturer as specified in the procurement documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43

MIL-T-62255C(AT)

3.1.1.14 Lubricants and fuel. Military equivalent of commercial recommended lubricants and fuel shall be depicted on a plate (see 3.1.1.1.3) and installed in a readily accessible and visible location in the vehicle cab. The plate shall indicate ambient temperature range for the various lubricants and fuel.

3.1.1.15 First aid kit. First aid kit shall be furnished and installed in the vehicle cab in an accessible location. First aid kit shall conform to Federal Motor Carrier Safety Regulation

393.96, Type B, Commercial Type Kit. The first aid kit shall be constructed of aluminum and as

specified in 393.86 (1) through 393.86 (7).

3.2 General design.

3.2.1 Federal Motor Vehicle Safety Standars. Vehicle and furnished accessories and components shall comply with all applicable Federal Motor Vehicle Safety Standards in effect on the date of manufacture, except as specified herein.

3.2.2 Air pollution control. Vehicle shall comply with the Environmental Protection Agency

Regulations governing control of air pollution from New Motor Vehicles and New Motor

Vehicle Engines in effect on the date of manufacture. In addition, vehicles shall comply with the State of California Regulations governing air pollution control in effect on the date of manufacture as applicable. Vehicle shall be labeled.

3.2.3 Sound level. The vehicle shall be labeled indicating that the interior and exterior noise level meets the requirements specified in 3.2.3.1 and 3.2.3.2.

3.2.3.1 Interior sound level. Interior sound level shall be measured in accordance with Table I, Category D of MIL-STD-1474, and shall be less than 85 db (A). Interior noise level shall be tested with the windows, vents and door in the open position and in the closed position, as stated in 5.1.2.1.5 of MIL-STD-1474.

3.2.3.2 Exterior sound level. Exterior sound level shall be in accordance with the Environmental Protection Agency Noise Emission Standards for Transportation Industry, Part III, Title 40, Chapter I, Part 205.

3.2.4 Vehicle components subjected to climatic environment. Vehicle components and material that will be subjected to climatic environment shall be capable of accepting the requirements specified in Table I without evidence of deformation, cracking or unusual wear, and shall not affect the vehicle warranty as expressed in procurement documents.