provided,
for
use
in
the chassis OEM tilt steering
winching down load straps.
column.
Quantities of straps and winch
TSTF
SYNTHETIC AUTOMATIC
binders shall be 6 each for
TRANSMISSION FLUID
16 to 18 foot bodies and 7
When code TSTF is specified,
each for 20 foot bodies and
the automatic transmission shall
longer.
be furnished with synthetic
lubricant.
Lubricant supplied
TTP
TRAILER TOWING PACKAGE
shall be approved by the
When code TTP is specified, a
component manufacturer and
trailer-towing package shall be
furnished by the chassis OEM.
provided.
Note: option not
available when code HTG,
TSW
RATCHET BINDERS
HTGU, HTGX, or BDS is
When code TSW is specified,
specified.
The trailer towing
load securing straps and winch
package shall consist of a pintle,
binders shall be provided. Code
with ground height, of 510 mm
TSW shall include the following:
(+125 mm, - 0) (20 in [+5, -0]),
a) 4 inch wide by 27 feet long
unless other wise specified,
(minimum) nylon straps
safety chain attachment devices,
webbing, breaking strength
a lighting receptacle, a trailer
20000
lb/9074
kg,
brake control system (see
assembled
breaking
3.4.11.2 for air brake equipped
strength 15000 lb/6805 kg.,
chassis),
and
associated
working load limit 5000
reinforcements and wiring, and
lb/2270 kg.
Flat hook
shall be installed on the rear of
working load limit 5000
the vehicle. The pintle shall be
lb/2270 kg on one end with
of the rotating type conforming
aluminum abrasion clip to
to MS 51118-1. The pintle shall
prevent chaffing.
be installed on the chassis
b)
Sliding steel track on
frame with reinforcements to
curbside, welded to bottom
transfer a vertical tongue load of
of crossmembers from first
not less than 1815 kg (4,000 lb)
crossmember
to
last
and a horizontal drawbar load of
crossmember,
with
not less than 178 kilonewtons
removable stop at each
(kN) (40,000 lb) directly to the
end to prevent winches
chassis rails. Except on Type II
from being lost. Flat steel
tractors, the rear most portion of
bar of adequate strength
the pintle shall be forward, but
welded to bottom of
not more than 100 mm (4 in)
crossmembers on street
forward, of the rear most part of
side, allowing strap hook to
the vehicle. Two trailer safety
not protrude past side rail
chain attachment devices, one
of body.
adjacent to each side of the
pintle, shall be provided. Each
c)
Storable winch binders,
attachment device shall provide
capable of storing a 4 inch
an ultimate strength at least
A 27 feet strap placed in
equal to the GVW of the truck
the slide track. A standard
furnished.
The attachment
winch
bar
shall
be
devices shall be capable of
Page 65 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business