the vehicle. On Type VII and
air conditioning from within the
Type VIII vehicles, the carrier
sleeper compartment.
shall be installed on the
SRP
RUSTPROOFING
curbside, under the body,
When code SRP is specified,
forward of the rear axle.
the vehicle shall be rustproofed
in accordance with FED-STD-
STF
STAGGERED FRAME
When code STF is specified, the
297.
frame shall be staggered behind
STA
SPARE TIRE ASSEMBLY
the cab to lower the height of the
When code STA is specified, a
rear frame by the amount the
spare tire assembly for the front
frame was raised to accomplish
axle shall be provided. The
the 4X4 conversion.
spare tire assembly shall be
identical to those on the axle for
T1
RETARDER-AUTOMATIC
TRANSMISSION-INTEGRAL
which it is intended. The spare
When code T1 is specified, a
tire assembly shall include an
hydrodynamic retarder integral
inflated spare tire(s) mounted on
with the automatic transmission
the spare wheel(s). If a Class F
(transmission retarder), shall be
vehicle is furnished with a higher
furnished.
A dash mounted
load range on the rear, the
switch shall be provided to
spare shall be the higher load
activate, modulate, or cut the
range.
brake augmentation. The switch
STB
SPARE MATCH REAR
shall be marked to indicate its
When code STB is specified, a
position.
When active, the
spare tire assembly for the rear
system shall be fully controlled
axle shall be provided.
by means of the conventional
driving
controls
to
apply
STC
OUTSIDE SPARE TIRE
retardation
during
vehicle
When code STC is specified, a
deceleration, and to cut it out in
carrier for a spare tire assembly
the other operating modes.
shall be provided. The carrier
design
shall
enable
safe
T6
MANUAL TRANSMISSION SIX (6)
removal or mounting of a spare
SPEED
tire assembly using only the
When code T6, is specified, a
tools specified in option JT. The
six speed manual transmission,
carrier shall enable the safe
shall be provided. Gear ratios in
removal and installation of the
the transmission shall provide a
spare tire assembly from and to
progressive
shifting
pattern
the vehicle and carrier without
throughout the complete range.
personnel
positioning
The transmission shall be
themselves or any part of their
provided with SAE J704 power
body under the spare tire
takeoff openings at the right and
assembly. Threaded fasteners,
left sides.
The transmission
when used to secure the spare
shall provide for maximum ease
tire assembly in the carrier, shall
of shifting in all speeds. The
be constructed of or plated with
input torque capacity of the
corrosion resistant material.
transmission shall equal or
The carrier shall be installed in a
exceed the maximum torque
readily accessible location on
delivered by the engine.
Page 62 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business