MIL-T-62316B(AT)
3.5.1.2 Curbside rear seat door(s). Split type double doors shall be provided on the curbside for exit and entrance of rear seat passengers. Safety glass windows shall be provided.
3.5.1.3 Rear doors. Split-type double rear doors with safety glass in the upper section of the doors shall be provided for the cargo area. Rear door windows shall be covered on the interior with security grill constructed of 13 mm (0.50 inch) flattened expanded metal. The grills shall be furnished with a frame and shall be hinged. The grills shall be attached to the inside of the rear door window frames in a manner which will prevent outside intrusion but will allow inside cleaning of the window glass. A cam-type latch shall be installed to retain the grill to the rear door window frame.
3.5.2 Vehicle interior trim. A headliner with commercial type insulation shall be furnished throughout the vehicle. The interior sides throughout the vehicle engine cover housing, doors, and the fire wall shall be provided with standard commercial type insulation and cover panels. Side panels shall be finish painted. A floor mat for the driver's area and the passenger area shall be furnished.
* 3.5.2.1 Insulation. Insulation shall be provided. Ceiling, walls, engine cover, doors and front cowl or firewall shall be insulated. Insulation shall include the driver's, passenger's, and cargo areas. Insulation shall not creep or peel when subjected to -46°C (-50°F) to 52°C (125°F). Adhesive used shall be compatible to the insulation material and capable of accepting extreme ambient temperatures. Insulation shall be fire retardant and shall not disperse toxic gases. The floor mat shall be provided with insulation.
* 3.5.2.1.1 Liner. A liner shall be secured over the insulation. Liner shall match the color of the vehicle interior.
3.5.3 Seating. Seating shall be provided for the driver and assistant driver. A manufacturer's standard bench type seat with seat back shall be furnished and the seat shall be capable of being removed. Upholstery weave, type, texture and color shall be identical and shall harmonize with the vehicle paint color. Bench type seat shall be positioned to the rear of the driver and assistant driver (see figures 2, 3 and 4).
3.5.3.1 Rear bench seat. A rear bench seat with back and capable of accommodating three personnel shall be provided. With the front seat(s) adjusted to the extreme forward position there shall be not less than 760 mm (30 inches), measured in a horizontal plane, between the front of
the crew seat back and rear of the front seat backs. A kickspace height of not less than 70 mm
(2.75 inches) shall be maintained between the floor and the rear of the front seats in all positions of adjustment. Leg room and space forward of the front seats shall not be reduced from that which is normally furnished. The seat assembly shall be removable by the manufacturer's standard method.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business