MIL-T-62316 Truck, Van, Panel: Calibration And Repair: 3900 Kilograms 8,600 Pounds Gvw, 4X2, Modified CommercialThis specification covers diesel or gasoline engine driven, four-wheel, two-rear wheel drive, forward control type commercial panel trucks, with cabinetry and shelving. The truck has a minimum gross vehicle weight GVW of 3900 kilograms kg 8,600 pounds. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents. See figures 1 through 5.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31

MIL-T-62316B(AT)

2. APPLICABLE DOCUMENTS

2.1 Government documents.

* 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).

SPECIFICATIONS FEDERAL

MILITARY

*	MIL-P-514	- Plates, Identification, Instruction and Marking, Blank.
*	MIL-T-5624	- Turbine Fuel, Aviation, JP-4 and JP-5.
	MIL-P-26514	- Polyurethane Foam, Rigid or Flexible, For Packaging.
	MIL-B-46176	- Brake Fluid, Silicone, Automotive All Weather, Operational and Preservative.
*	MIL-T-83123	- Turbine Fuel, Aviation, Kerosene Type, Grade JP-8.

STANDARDS FEDERAL

FED-STD-297 - Rustproofing of Commercial (Nontactical)

Vehicles. FED-STD-595 - Colors.

MILITARY

	MIL-STD-209	- Slinging and Tie Down Provisions For Lifting and Tying Down Military Equipment.
*	MIL-STD-1223	- Nontactical Wheeled Vehicles Treatment,
		Painting, Identification Marking and Data Plate Standards.
	MS 51939	- Loop, Strap Fastener (Footman's Loop).

* (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Naval Publications and Forms Center, Military Specifications and Standards, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)