MIL-T-62032H
* 3.2.10 Asbestos. Asbestos material shall not be used in any form in any part of the vehicle.
3.3 Performance. Performance requirements for model 4x4 and 6x6 vehicles shall be
met with the front wheel drive disengaged and with front wheel hubs (when furnished) unlocked, except that a vehicle equipped with interaxle compensating devices shall meet performance requirements with the front wheel drive engaged.
3.3.1 Speeds and gradeability. High and low speed requirements shall be met with the vehicle loaded to the specified GVW.
* 3.3.1.1 High speed gradeability. The vehicle shall ascend continuous grades specified in table IV at 50 miles per hour (mph). Gradeability requirements shall be met with the main transmission in direct drive, and when a multispeed axle is furnished, with the axle in high speed range. Gradeability shall be verified with calculations in accordance with SAE J688 (see 6.3).
TABLE IV. Gradeability.
Vehicle |
Percentage grade |
16 19 28 34.5 36 44 50 |
2.5 1.5 1.0 0.5 0.5 0.5 0.5 |
3.3.1.2 Low speed. Low speed for vehicles with a manual transmission shall be calculated with the engine operating at not less than 35 percent of the recommended governed speed, and shall provide not more than the vehicle speed specified in table V for the corresponding number of available speeds.
TABLE V. Vehicle low speed requirement.
Number of forward speeds |
Speed (mph) |
4 or 5 7 8 9 or 10 |
4.5 3.5 3.0 2.5 |
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business