MIL-T-62032 Trucks, Tank: Fuel Servicing And Aircraft Fuel Servicing, 1,000 To 4,000 Gallon, Diesel And Gasoline Engine Driven, 16,000 To 50,000 Pounds Gvw, 4X2, 4X4, 6X4, And 6X6, Modified CommercialThis specification covers diesel and gasoline engine driven, four-wheel, two- or four-wheel drive, and six-wheel, four- or six-wheel drive, single or dual delivery fuel servicing and aircraft fuel servicing tank trucks, with product capacities from 1,000 to 4,000 gallons, having minimum gross vehicle weights GVW of 16,000 to 50,000 pounds for normal operating conditions. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62

MIL-T-62032H

standard or optional items, which meet or exceed the requirements of this specification. Except as specified in 3.1.1 through 3.1.1.11, no removal, substitution or alteration of the chassis manufacturer's standard or optional chassis model components shall be made. All chassis items shall be as represented in the chassis manufacturer's technical data book. Special bodies or mounted equipment shall be as represented in the body and equipment manufacturer's technical data. Technical data shall be limited to specifications and technical material, identical to that furnished to the authorized company representatives for selection of vehicle models and components, and shall be available in the engineering offices of the procuring activity prior to delivery of the items. The chassis model furnished shall be not older than the chassis manufacturer's current model on the date of invitation for bids.

3.1.1 Special requirements. In addition to the standard vehicle and components specified in 3.1, the vehicle shall be furnished with special equipment as specified herein.

* 3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with MIL-STD-1223. The exterior color shall be in accordance with the requirements of

MIL-STD-1223 for the military service identified by the procuring activity (see 6.2); except the exterior color of type III and IV vehicles shall be gloss yellow, matching color chip No. 13538 of

FED-STD-595.

* 3.1.1.2 Marking and data plates. As specified by the procuring activity for the appropriate military service (see 6.2), identification marking and data plates shall be in accordance with MIL-STD-1223. When specified (see 6.2), concealed markings shall be furnished.

3.1.1.3 Rustproofing. All welds of mild steel to stainless steel hidden from view from the exterior of the vehicle shall be rustproofed in accordance with FED-STD-297, whether other areas are required to be rustproofed or not. When specified (see 6.2), the vehicle shall be rustproofed in accordance with MIL-STD-297. When specified (see 6.2), tropical rustproofing in accordance with MIL-STD-297 shall be provided.

3.1.1.4 Drain plugs. All drain plugs installed in the transfer case, manual transmission and drive axle(s) shall be of the permanent magnet type.

3.1.1.5 Towing devices. Not less than two hooks, loops, or pins or a single center mounted towing eye for towing the vehicle shall be furnished on the front of the vehicle.

* 3.1.1.6 Bonding straps. Bonding straps shall be furnished between the chassis frame and the metal cab, metal fenders, metal engine hood and tank body and also between the cabinet doors, pump, meter, filter/separator (if a filter/separator is required), or other static-producing