MIL-T-740G
6.8 Boom marking. Boom markings shall be as follows:
a. On driver's side only, scribe and paint a 3/4 inch vertical stripe along the outer edge of shipper. Extend the strip over onto boom, with the boom retracted and retained in horizontal position.
b. To the right of and parallel with the first stripe label "11 1/2 Ft" in 2 inch letters.
c. Pain a horizontal 3/4 X 6 inch long arrow on the shipper pointing to the edge of the first stripe.
d. Extend boom to the maximum length. The second stripe shall be scribed and painted
6 inches to the left of the "11 1/2 Ft" stripe. The 12 foot stripe and each succeding stripe shall be scribed, painted and labeled consecutively at one foot intervals along the boom through "19 ft."
e. The extension shall be striped at one foot increments with its retracted position to its fully extended position but will not be labeled with number designations. The number of stripes visible on the extension shall be added to the number of feet indicated on the boom to establish the total number of feet the complete boom is extended.
6.9 Kits. When required by the services, the following GFE special purpose or accessory kits are available through normal supply channels when required for a specific vehicle.
Fording kits
Group Kit Vehicle model(s) Nomenclature
1 5701841 M51 & M61 Kit, Deep Water
Fording
5701842 M52 Kit, Deep Water
Fording
5702843 M54 & M55 Kit, Deep Water
Fording
2 5703702 All vehicles except the Kit, Deep Water
Fording
M543A2 and M139A2F Kit, Deep Water
Fording
570703 M543A2 Kit, Deep Water
Fording
5702844 M139A2F Kit, Deep Water
Fording
43
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business