MIL-T-740 Trucks; 5 Ton, 6X6, Military Design, M39, M39A1, M39A2 And M809 SeriesThis specification covers general and special purpose 5 ton, gasoline, multi-fuel, and diesel engine powered, six-wheel, six-wheel drive, military design truck chassis, trucks, and truck tractors having single front and dual rear wheels.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51

MIL-T-740G

4.4 Methods of inspection.

4.4.1 Special kits installation examination. To determine conformance to 3.3.1 through

3.3.1.7, a specific kit when furnished shall be installed on vehicle(s), and examined for proper installation or interference with other components.

4.4.2 Soft top examination. To determine conformance to 3.3.2, the vehicle shall have a complete soft top installed. Top shall be examined for proper installation, completeness, and for functional requirements.

4.4.3 Wheel balancing examination. To determine conformance to 3.3.3, the front wheels shall be examined for balance.

4.4.4 Stowed material examination. To determine conformance to 3.3.4, all manufacturer and depot installed OVM shall be stowed on selected vehicle. All items shall fit with proper clearance in the spaces provided. The equipment shall be removed after test. The OVM used shall be as specified in the contract. The contractor will be permitted to unpackage and repackage equipment used for test.

4.4.5 Engine examination. To determine conformance to 3.3.5, engine shall be examined for conformance to applicable documents and proper installation.

4.4.6 Heaters and air flow modulation examination. To determine conformance to 3.3.6.1, heaters shall be examined for damage, conformance to applicable drawings, and proper installation. Air inlet damper shall be adjusted to determine conformance to 3.3.6.1.1.

4.4.7 Air conditioner examination. To determine conformance to 3.3.6.2, air conditioner installation provisoins shall be examined for conformance to applicable drawings.

4.4.8 Winch examination. To determine conformance to 3.3.7, winch and controls shall be examined for completeness and proper installation.

4.4.9 Lubrication and fittings examination. All surfaces requiring lubrication shall be examined for proper fitting and means for proper lubrication in accordance with 3.3.8.

4.4.10 Wrecker crane and controls examination. To determine conformance to 3.3.9, the wrecker crane and controls shall be examined for damage, completeness, and proper installation.

4.4.11 Truck, bolster logging examination. To determine conformance to 3.3.10, the body bolster shall be examined for proper installation of all components as specified on applicable drawings.