MIL-T-62320 Trucks, Van: Shop, Diesel And Gasoline Engine Driven, 19,000 Pounds Gvw, 4X2 And 4X4, CommercialThis specification covers diesel and gasoline engine driven, four-wheel, two-rear-wheel drive, and four-wheel, four-wheel drive, shop van trucks having a minimum gross vehicle weight GVW of 19,000 pounds for normal operating conditions. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32

MIL-T-62320C

Table 1                                          -  Tire Factor.  This factor must relate to the size of tires furnished by the contractor in accordance with this specification.

Table 2                                          -  Altitude Factor.  1.00

Table 3                                          -  Rolling  Factor.  1.613

Table 4                                          -  Area Factor.  0.173

Table 5                                          -  Velocity Factor.  250.0

Table 6                                          -  Altitude Factor.  1.00

Table 7                                          -  Chassis Friction Horsepower.  Use applicable power unit

GVW (to nearest, higher, tabulated 1,000 pounds) and the engine rpm (to nearest 100 revolutions) which is required for 50 mph geared speed.  For GVW and engine speed beyond the range of this table, factors shall be extrapolated.

Table 8                                          -  Grade Factor.  0.75

Table 8A                                       -  Correction Factor.  Not required. Table 9                                          -  Road Factor.  0.0.

*    6.4  Subject term (key word) listing.

Air pollution control

Auxiliary rear door

Electrical system 120-Vac/12-Vdc

Exhaust fan Insulation Space heater

Truck, van, shop

Van body wind deflection

Windows

Window regulators.

6.5  Identification of changes.  The margins of this specification are marked with asterisks (*) to indicate where changes (additions, modifications, corrections, deletions) from the previous issue were made.  This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations.  Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content regardless of the marginal notations and relationship to the previous issue.

Custodians:        Preparing activity: Army - AT                                                                                    Army - AT

Air Force - 99

Review activity: Air Force - 84

Project No.  2320-0420

32