MIL-T-62320 Trucks, Van: Shop, Diesel And Gasoline Engine Driven, 19,000 Pounds Gvw, 4X2 And 4X4, CommercialThis specification covers diesel and gasoline engine driven, four-wheel, two-rear-wheel drive, and four-wheel, four-wheel drive, shop van trucks having a minimum gross vehicle weight GVW of 19,000 pounds for normal operating conditions. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32

MIL-T-62320C

4.3.5  Production sample.  Upon acceptance of the first production vehicle, it shall remain at the manufacturing facility as a production sample, and shall be the last vehicle shipped on the contract.  The contractor shall maintain the vehicle in a serviceable condition for the duration of the contract.

4.3.6  Failure.  Failure of the first production vehicle to meet requirements of the contract shall be cause for the Government to refuse acceptance of all vehicles under contract until corrective action has been taken.

4.4  Inspection of production vehicles.  The contractor's inspection system shall, as a minimum, assure that the vehicle conforms to the physical and dimensional requirements and is capable of meeting performance requirements contained herein.  For each vehicle under contract, the contractor shall make available to the Government, at the point of final acceptance, records acceptable to the Government indicating that the servicing and adjusting required by 3.6 have been accomplished.

5.  PREPARATION FOR DELIVERY

5.1  Vehicle processing.  The vehicle shall be processed for shipment, from the manufacturer's plant to the initial receiving activity, in accordance with the manufacturer's standard commercial practice.

6  NOTES

6.1  Intended use.  The vehicle covered by this specification is intended for general nontactical use by the Government in transporting personnel or cargo.

*    6.2  Ordering data.  Acquisition documents should specify the following:

(a)   Title, number, and date of this specification. (b)   Model of vehicle required (see 1.2).

*        (c)   Issue of DODISS to be cited in the solicitation and if required, the specific issue of individual documents referenced (see 2.1.1 and 2.2).

(d)   Identification of appropriate service for painting and marking (see 3.1.1.1). (e)   Concealed markings, if required (see 3.1.1.1).

(f)    Rustproofing, if required (see 3.1.1.2).

(g)   Tropical rustproofing, if required (see 3.1.1.2).

(h)   Drive hubs, if required for 4x4 model vehicles (see 3.1.1.6). (i)    Lighting cable, if required (see 3.1.1.8).

(j)    Electric trailer brake controller, if required (see 3.1.1.9).

30