MIL-T-62735 Trucks And Truck Tractors: Modified Commercial, General Specification ForThis specification covers general requirements for the classes, models and types of modified commercial trucks indicated in the specification title above and in 1.2 below. This specification is intended only as a document to be referenced in detail specification sheets that must, as a minimum, cover detailed truck body requirements and specify the model and class required from table I.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68

MIL-T-62735

the component manufacturers. Hydraulic oils shall be approved by the hydraulic pump and hydraulic system manufacturers for severe service.

3.9.14.1 Lubrication chart. When operation with military lubricants is specified, the vehicle shall have a lubrication chart (plate) conforming to 3.10.5. The chart shall identify the interchangeable military and commercial lubricants.

3.9.15. Common locks and keys. When specified (see 6.2), the same key that fits the cab door locks shall fit the starting (ignition) lock. This same key shall fit the door locks and starting locks on all vehicles under contract. Two such interchangeable keys shall be furnished with each vehicle.

3.9.16 Light shut-off switch. When specified (see 6.2) a single switch, in addition to and not in place of the normal light switches, shall extinguish all vehicle exterior lights and the cab interior light, as well as any and all body lights. The switch shall be identified in accordance

with 3.10.5.

3.10 Treatment, painting and marking.

3.10.1 Treatment and painting. The complete vehicle shall be treated and painted in accordance with MIL-STD-1223. As specified by the procuring activity for the appropriate military service (see 6.2), the exterior color shall be in accordance with MIL-STD-1223. See MIL-STD-1223 for special painting requirements for vehicles in semigloss and lusterless colors.

3.10.2 CARC. When specified (see 6.2), in addition to the requirements of 3.10.1, chemical agent resistant coating (CARC) in accordance with Army Drawings 12369024 and

12369025 shall be provided.

3.10.3 Markings and data plates. As specified by the procuring activity for the appropriate military service (see 6.2), identification markings and data plates shall be in accordance with MIL-STD-1223.

3.10.4. Hydraulic fluid identification plate. When a body hydraulic system is furnished and the hydraulic system required fluid replenishment, the vehicle shall have a decal or plate in accordance with 3.10.5 near the filler cap to identify the type of hydraulic fluid to be used.

3.10.5 Additional decals and plates. Loading charts, operating instructions, switch and control identification marking and caution notices and warnings and all other equipment markings specified herein shall be a standard or optional feature with the original equipment manufacturer (OEM) of that equipment and shall be furnished by that OEM or shall conform to composition A (class 1 or 2) or composition C of MIL-P-514.