MIL-T-62735
3.3.1.7 Sleeper cab. When specified for class 24 and larger 4x2 and 6x4 models
(see 6.2), in addition to the requirements of 3.3.1 through 3.3.1.3, the cab shall be of the sleeper type. The sleeper compartment shall be not less than 760 mm (30 inches) in depth. The sleeper compartment shall be fitted with a foam mattress and a sleeper occupant restraint system. The cab shall have a luggage compartment. The luggage compartment shall have locking access doors, or doors that can only be opened from inside, on both sides of the cab. The sleeping compartment shall have curtains and a domelight. The sleeper compartment shall have heating and air conditioning. Auxiliary air temperature controls or louvers shall be furnished in the sleeper compartment. The controls or louvers shall provide for remote regulation of both heating and air conditioning within the sleeper compartments.
3.3.2 Diesel engine. Unless otherwise specified (see 3.3.3), the vehicle shall be diesel engine driven. See 3.9.4.
3.3.2.1 Starting system. For diesel engine driven vehicles, engine starting equipment shall include an ether starting system, glow plug or electric grid heater.
3.3.2.2 Ether system. The ether system shall be of the measured shot type. The ether system shall be key operated or manually operated from the driver's compartment. The system shall be inoperative with the engine warm. There shall be complete provisions for a replaceable ether reservoir of not less than 355 milliliters (mL) (12 fluid ounces). A reservoir need not be furnished, but shall be readily available from the chassis manufacturer's dealers and other commercial sources.
driven.
3.3.3 Gasoline engine. When specified (see 6.2), model 4x2 shall be gasoline engine
3.3.4 Oil filter. Engine equipment shall include a full flow or combination full flow and bypass oil filter.
3.3.5 Air cleaner. The engine shall have an air cleaner. When specified for diesel engine driven vehicles (see 6.2), the air cleaner shall have a service indicator (gage or warning light) visible to the seated driver.
3.3.6 Fuel and water separator. The fuel system shall have a fuel filter. When specified (see 6.2), the vehicle shall have a fuel and water separator. The separator shall include a water coalescer and a drain valve. When a separator is required, it may be a combination filter/separator.
3.3.7 Governor. For class 19 and larger vehicles, the engine shall have a governor. The governor shall be set and sealed to limit the engine to the engine manufacturer's maximum recommended operating speed.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business