MIL-T-62097 Truck, Motor Home Shell, For Customization Into Mobile Laboratory, Electronics Van, Work Area, Etc., 14,000 Pounds Gvw, 4X2, Modified CommercialThis specification covers diesel and gasoline engine driven four-wheel, two-rear wheel drive, forward control motor home shells, having a minimum gross vehicle weight GVW of 14,000 pounds, for normal operating conditions. The vehicle has an integral drivers compartment and body for later installation of such special equipment as may be desired. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in procurement documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-T-62097C

(ah) (ai)

Standard air conditioning, if required (see 3.4.18).

An air conditioning system of increased capacity, if required (see 3.4.18)

(aj)

(specify capacity).

Customized engine compartment, if required (see 3.4.19) (specify details).

(ak)

(al)

Automatic engine shutdown system, if required (see 3.4.21).

Remote control curbside rear view mirror, if required (see 3.4.22).

(am)

(an)

Heated rear view mirrors. if required (see 3.4.22).

Additional accessories, if required (see 3.4.23).

(ao)

(ap)

Insect screen, if required (see 3.4.25).

Leveling jacks, if required (see 3.4.26).

(aq)

(ar)

An engine hour meter, if required (see 3.4.27).

Cooling system protection down to -65°F, if required (see 3.4.28.1).

(as)

(at)

Customized body, if required (see 3.5) (specify details).

Customized interior panels, if required (see 3.5.1.6) (specify details).

(au)

(av)

Customized windows and doors, if required (see 3.5.3) (specify details).

Customized interior furnishings, if required (see 3.5.4) (specify details).

(aw)

(ax)

Customized interior electrical system, if required (see 3.5.4.1) (specify details).

Power plant stowage compartment(s), if required (see 3.5.4.2) (specify details).

(ay)

(az)

Customized heating system, if required (see 3.5.43) (specify details).

Fire extinguisher(s), if required (see 3.6.1).

(ba)

Highway warning kit, if required (see 3.6.2).

6.3 Performance prediction. SAE Truck Ability Prediction Procedure computations and computations for low speed and maximum geared speed will be required by the contract. The SAE Work Sheet Item 1 should include vehicle model number, engine model number, and vehicle type and class. Unless other conditions are cited in this contract, computations should be made for normal atmospheric pressure, normal ambient ait temperature, and still, dry, air. The factors to be used in predicting truck ability (see 3.3.1.1) are established as follows for the corresponding SAE J688, Truck Ability Prediction Procedure Tables:

Table 1 - Tire Factor. This factor must relate to the size of tires furnished by the contractor in accordance with this specification.

Table 2 - Altitude Factor. 1.00

Table 3 - Rolling Factor. 1.613

Table 4 - Area Factor. 0.173

Table 5 - Velocity Factor. 250.0

Table 6 - Altitude Factor. 1.00