MIL-T-62079 Truck, Panel: Police Patrol Conversion, 8,000 Pounds Gvw, 4X2, CommercialThis specification covers a gasoline engine driven, four-wheel, two-rear wheel drive, forward control type, commercial panel or window van truck converted to a police patrol wagon with a rear compartment for confined occupants. The vehicles have a minimum gross vehicle weight GVW of 8,000 pounds. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

MIL-T-62079E

4.3.5  Failure.  Failure of the first production vehicle to meet requirements of the contract shall be cause for the Government to refuse acceptance of all vehicles until corrective action has been taken.

4.4  Inspection of production vehicles.  The contractor's inspection system shall, as a minimum, assure that the vehicle conforms to the physical and dimensional requirements and is capable of meeting performance requirements contained herein.  For each vehicle under contract, the contractor shall make available to the Government, at the point of final acceptance, records acceptable to the Government indicating that the servicing and adjusting required by 3.10 have been accomplished.

5.  PACKAGING

5.1  Vehicle processing.  The vehicle shall be processed for shipment, from the manufacturer's plant to the initial receiving activity, in accordance with the manufacturer's standard commercial practice.

6.  NOTES

6.1  Intended use.  The vehicle covered by this specification is intended for general nontactical use by the Government for police patrol activities and for transporting confined occupants.

6.2  Ordering data.  Acquisition documents should specify the following: (a)   Title, number, and date of this specification.

(b)   Issue of DODISS to be cited in the solicitation, and if required, the specific issue of

individual documents referenced (see 2.1.1 and 2.2).

(c)   Identification of appropriate service for painting and marking (see 3.1.1.1). (d)   Concealed markings, if required (see 3.1.1.1).

(e)   Rustproofing, if required (see 3.1.1.2).

(f)    Tropical rustproofing, if required (see 3.1.1.2).

(g)   Silicone brake fluid, if required (see 3.1.1.5). (h)   Power plant heaters, if required (see 3.4.1.1).

(i)    Auxiliary 24-volt system, if required (see 3.4.2.3). (j)    Manual transmission, if required (see 3.4.5.3).

(k)   Heavy duty springs and shock absorbers, if required (see 3.4.7).

(l)    Positive-traction, limited slip or automatic locking differential, if required (see 3.4.8.1).

(m)  Bias ply or other type tires, if required (see 3.4.9.1). (n)   If spare tire carrier is not required (see 3.4.9.3).

(o)   Spare wheel or rim, if required (see 3.4.9.4). (p)   Spare tire assembly, if required (see 3.4.9.5).

(q)   Tools, if required (see 3.4.14).

(r)   Air conditioning, if required (see 3.4.15.1).

19