4.5
FAILURE.
When transportability (ATR, HTR, MTR or
Failure of the first production vehicle to
RTR) is specified, the vehicle shall be
meet requirements of the contract shall be
inspected to determine that it conforms to
cause for the Government to refuse
the approved certification memo the
acceptance of all vehicles under contract
contractor
received
from
Air
until corrective action has been taken.
Transportability Test Loading Agency
(ATTLA) or Military Surface Deployment
4.6
INSPECTION OF PRODUCTION
and Distribution Command Transportation
VEHICLES.
Engineering Agency (SDDCTEA). As a
The contractor's inspection system shall
minimum,
the
following
angles,
as a minimum ensure that the vehicle
dimensions and descriptions shall be
conforms to the physical and dimensional
checked against approved data and
requirements and is capable of meeting
drawings:
performance
requirements
specified
a) Angle of approach
herein. For each vehicle under contract,
the contractor shall make available to the
b) Ramp breakover angle
Government, at the point of final
c) Angle of departure
acceptance, records acceptable to the
Government indicating that the servicing
d) Height, longitudinal location and
and adjusting required by 3.4.25 have
identification of highest component
been accomplished.
For civilian
on truck
agencies, GSA Form 1455 or an
e) Dimensions and locations of any
approved equivalent form shall be used.
significant projections on truck
4.7
PRODUCT CONFORMANCE.
f)
Curb weight of each axle
The products provided shall meet the
g) Wheelbase
salient characteristics of this standard,
conform to the producer's own drawings,
h) Front overhang
specifications, standards, and quality
i)
Rear overhang
assurance practices and be the same
j)
Articulation of rear suspension,
product offered for sale in the commercial
unloaded, each axle (curb weight)
market. The Government reserves the
right
to
require
proof
of
such
k) Rear axle spacing
conformance.
l)
Axle rating, front, and comparison
► 5.
PACKAGING.
to 1 ¼ times (curb weight) load
► 6.
NOTES.
m) Axle rating, rear, and comparison
to 1 ¼ times (curb weight) load
6.1
INTENDED USE.
The vehicles covered by this specification
n) Suspension rating, front, and
are intended for general use by the
comparison to 1 ¼ times (curb
Government in transporting personnel or
weight) load
cargo; for use in performance of the
o) Suspension rating, rear, and
maintenance and construction tasks
comparison to 1 ¼ times (curb
indicated; or for the mounting of special
weight) load
bodies or equipment.
Agencies shall
specify unusual operating conditions,
p) If axle stops are to be removed for
items and requirements not specified
ramp
loading
on
aircraft,
herein.
verification that the driveline
remains intact when cresting
maximum ramp slope.
Page 77 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business