MIL-T-46765(AT)
* 3.2.9 Prohibited materials. Asbestos materials shall not be used in any form in any part of the vehicle. No item, part of assembly shall contain radioactive materials in which the specific activity is greater than 0.002 microcurie per gram or activity per item equals or exceeds
0.01 microcuries.
3.3 Performance.
3.3.1 Speeds and gradeability. High and low speed requirements shall be met with truck loaded to specified GVW.
3.3.1.1 High speed gradeability. The vehicle shall ascend continuous grades specified in table II at 80 kilometers per hour (km/h) (50 miles per hour (mph)). Gradeability requirements shall be met with the main transmission in direct drive, and when a multi-speed axle is furnished, with the axle in high speed range. Gradeabilitysha1l be verified with calculations in accordance with SAE J688 (see 6.3).
* TABLE II. Gradeability.
Vehicle size |
Percent of grade |
1200 2000 |
2.3 1.5 |
3.3.1.2 Low speed. Low speed for vehicles with a manual transmission shall be calculated with the engine operating at not less than 35 percent of the recommended governed speed, and shall provide not more than the vehicle speed (mph) specified in table III for the corresponding number of available forward speeds.
TABLE III. Low speed requirement.
*
3.3.1.3 Maximum geared speed. The maximum geared speed at engine governed speed shall be not less than 93 km/h (58 mph). Conformance to geared speed specified shall be determined by calculating in accordance with the following formula:
Maximum geared speed (km/h)
Governed speed (rpm) x 1.609 Total gear reduction x tire factor (see 6.3)
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business