MIL-T-45380E(AT)
(f) Replacement headlights, if required to be added, shall meet the height requirement of not less than 22 inches and not more than 54 inches, measured above the road surface, in conformance with Federal Motor Vehicle Safety Standard No. 108. Replacement headlights shall be equivalent in mounting, protection, and range and precision of adjustment to the chassis manufacturer's original standard headlights.
(g) Unused headlight cavities are covered in a neat workmanlike manner treated and painted to match the chassis cab color with treatment and painting equivalent to the chassis cab manufacturer's process for the remainder of the chassis cab. Cavities and their covers shall be rustproofed in accordance with 3.1.1.3.
(h) Complete installation drawings are available to the procuring activity.
3.2 General design.
3.2.1 Federal Motor vehicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.
3.2.2 Air pollution control. The vehicle shall comply with the Environmental Protection Agency regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicles Engines in effect on the data of manufacture. In addition, vehicles destined for California shall comply with State of California regulations governing air pollution control in affect on the date of manufacture.
* 3.2.3 Sound level. The cab interior sound 1evel shall not exceed 84db(A) when measured in accordance with Federal Motor Carrier Safety Regulation 393.94. The vehicle exterior sound level shall conform to Environmental Action Agency Noise Emission Standards for transportation Equipment, Medium and Heavy Trucks.
3.2.4 Curb weight. The curb weight shall include the weight of the chassis and cab, with all attachments, accessories, and equipment; body; and full complement of fuel, lubricants, and coolant.
3.2.5 Gross vehicle weight. The GVW shall consist of curb weight operator weight
(computed at 175 pounds), and a payload to provide not less than the specified GVW. A
vehicles with crew (four-door) cab shall have the GVW computed with 525 pounds of payload in
the rear seat.
3.2.6 Weight distribution. The distribution of the GVW for the purpose of establishing suspension, axle, and tire capacities shall be determined with the payload uniformly distributed over the load area.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business