MIL-C-62310A(AT)
3.3 Materials. Materials shall be as specified herein and in referenced drawings,
specifications, and standards. Materials shall be free of defects and imperfections that might
affect the serviceability and function of the finished product (see 6.10).
3.3.1 Ozone resistance. When rubber components are required to be ozone resistant, the
degree of resistance shall be as specified in applicable specifications or drawings.
3.3.2 Qualified products. The contractor shall be responsible for using parts and assemblies
from Qualified Products Lists (QPL's) whenever available. Contractor's inspection records shall
specifically list all QPL items by number and date of the QPL, name of contractor and part or
drawing number(s). When parts and assemblies are approved as qualified products, but not yet
listed on the QPL, the contractor shall list the products by number and date of the approved
document and name of contractor.
3.4 Construction. The vehicle shall be constructed in accordance with the following
drawings, as applicable, and applicable specifications and standards (see 2.1). If more than one
unit of a particular component is used, the components used shall be identical in make, material
and quality. Riveting, welding practices and quality shall be the same on each vehicle.
Completed vehicles shall meet all requirements specified herein, and be of a quality that assures
a vehicle free of defects that would compromise, limit, or reduce its performance.
Model
Drawing Number
M106A2
8750026
M113A2
8750024
M125A2
8750027
M577A2
8750025
M741A1
8750030
M901
12253500
3.4.1 Bearing seals. When fording, operating amphibiously, or in mud, sand or snow, seals
shall prevent the entrance of foreign matter into the bearings, which are exposed to
contamination during these operations. Bearing seals shall restrict the leaking of lubricants from
bearings.
3.4.2 Special equipment.
3.4.2.1 Winterization equipment. Provisions shall be made for installation of winterization
equipment, including personnel heaters. When installed (see 6.2), winterization equipment shall
assure operation under arctic conditions in ambient temperatures of minus 25°F to minus 60°F.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business