One full height vertical cabinet
than 20 gage 9 mm (0.0359 in.)
on each side of the body, rear
galvanneal steel with reinforcement.
of the wheel housing, with one
Aluminum and fiberglass body shall have
adjustable shelf each.
cabinet material and construction of same
material(s) as the rest of the body.
(D)
14 foot bodies
Strength of finished cabinets shall be at
One horizontal cabinet on each
least equal to that of steel construction.
side of the body with at least a
The cabinet interior shall be prepared and
middle shelf of small bins and
primed with a light colored gray finish,
adjustable partitions. Three full
except that galvanized coated steel
height vertical cabinets on each
shelves need not be painted.
side of the body front with not
less than two removable
3.5.6.2
CABINET ARRANGEMENT.
shelves each. One full height
The cabinet arrangement shall be as
vertical cabinet on each side of
follows:
the body, to the rear of the
wheel housing, with one
(A)
9 and 10 foot bodies
adjustable shelf each.
One horizontal cabinet on each
side of the body with at least a
3.5.6.3
CABINET DOORS.
middle shelf of small bins with
Cabinet door shall provide access to all
adjustable partitions. One full
portions of each cabinet, and door
height vertical cabinet on each
closures
shall
be
weatherproof
side of the body at the front with
incorporating an automotive tubular type
not less than two removable
neoprene sealing system. Doors shall
shelves each. One full height
have full length continuous rod or hem
vertical cabinet on each side of
type heavy-duty hinges, with stainless
the body, to the rear of the
steel hinge pins or stainless steel, bronze,
wheel housing, with one
or nylon insert sockets. Latches shall
adjustable shelf each.
have recessed handles. All doors shall be
(B)
11 foot bodies
provided with cylinder type locks,
One horizontal cabinet with at
operable from the same key but having
least a middle shelf of small
various combinations of cylinder locks, as
bins with adjustable partitions,
available, between vehicles on multi-unit
on each side of the body. Two
contracts. Moving parts of latches and
full height vertical cabinets, on
locks shall be constructed of, or plated
each side of the body at the
with corrosion-resistant material.
All
front, with not less than two
vertical doors shall be furnished with
removable shelves each. One
double spring loaded stays to facilitate
full height vertical cabinet to the
both hold open and closing, and doors
rear of the wheel housing, on
shall not interfere with each other when
each side of the body, with one
open. Horizontal doors shall have two (2)
adjustable shelf.
removable pivoting supports to hold open
(C)
12 foot bodies
in the 90-degree position and be
One horizontal cabinet with at
reinforced so as to permit their use as a
least a middle shelf of small
shelf. Latches and striker plates shall be
bins with adjustable partitions,
non-welded, easily replaced and striker
on each side of the body.
plates shall be readily adjustable.
Three full height vertical
Fiberglass bodies shall be reinforced in
cabinets on each side of the
the latch and hinge hardware areas.
body front with not less than
two removable shelves each.
Page 28 of 79
to verify that this 7 4Y
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business