MIL-T-62319C
* |
(e) |
The conversion vehicle is certified to conform to Federal Motor Vehicle Safety Standard, No. 121, by the intermediate or final manufacturer. |
(f) |
Replacement headlights, if required to be added to meet the height requirements of |
|
Federal Motor Vehicle Safety Standard No. 108, are equivalent in mounting, protection, and range and precision of adjustment to the chassis manufacturer's original standard |
||
(g) |
headlights. Unused headlight cavities are covered in a neat workmanlike manner, treated and |
|
painted to match the chassis cab color with treatment and painting equivalent to the chassis cab manufacturer's process for the remainder of the chassis cab. Cavities and |
||
* |
(h) |
their covers shall be rustproofed in accordance with 3.1.1.2. Complete installation drawings are available to the procuring activity. |
* 3.1.1.14 Decals and data plates. The hydraulic tailgate operating instructions and the power takeoff caution notice shall conform to type I or type II, class 1 of MIL-M-437l9 or
composition A (class l or 2) or composition C of MIL-P-5l4.
3.2 General design.
3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture.
3.2.2 Air pollution control. The vehicle shall comply with EPA Regulations governing Control of Air Pollution from New Motor Vehicles and New Motor Vehicle Engines in effect on the date of manufacture. In addition, vehicles destined for California shall comply with the State of California regulations governing air pollution control in effect on the date of manufacture.
3.2.3 Sound level. The interior sound level shall conform to Federal Motor Carrier Safety Regulation 393.94. The vehicle exterior sound level shall conform to EPA Noise Emission Standards for Transportation Equipment Medium and Heavy Trucks.
3.2.4 Curb weight. The curb weight shall include the weight of the chassis and the cab, with all attachments, accessories and equipment; the body; and a full complement of fuel, lubricants and coolant.
3.2.5 Gross vehicle weight. Gross vehicle weight (GVW) shall consist of curb weight, operator weight (computed at 175 pounds), and a payload to provide not less than the specified GVW. Vehicle with four-door crew cab shall have GVW computed with 525 pounds of payload in the rear seat.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business