MIL-T-62246 Truck, Dump, Street Maintenance, Diesel And Gasoline Engine Driven, 21,000 Pounds Gvw, 4X2, CommericalThis specification covers diesel and gasoline engine driven, four-wheel, two-rear-wheel drive dump trucks equipped with a material sprayer, an auxiliary engine driven air compressor, and a vibrating roller for use in street maintenance. Vehicles shall have a minimum gross vehicle weight GVW of 21,000 pounds for normal operating conditions. Vehicles procured under this specification are commercial items which shall be warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27

MIL-T-62246B(AT)

J350

- Spark Arrester Test Procedure for Medium Size Engines

(DoD adopted).

J537

- Storage Batteries.

J551

- Performance Levels and Methods of Measurement of

Electromagnetic Radiation from Vehicles and Devices

J560

(30-1000 MHz).

- Seven Conductor Electrical Connector for Truck Trailer

J588

Jumper Cable.

- Turn Signal Lamps.

J589

J682

- Turn Signal Switch.

- Rear Wheel Splash and Stone Throw Protection

J688

(DoD adopted).

- Truck Ability Prediction Procedure (DoD adopted).

J704

- Openings for Six- and Eight-Bolt Truck Transmission

Mounted Power Take-Offs.

J844

J1349

- Nonmetallic Air Brake System Tubing (DoD adopted).

- Engine Power Test Code - Spark Ignition and Diesel.

(Application for copies of SAE publications should be addressed to SAE, Inc.,

400 Commonwealth Drive, Warrendale, PA 15096.)

THE TIRE AND RIM ASSOCIATION, INC.

Yearbook.

(Application for copies of Tire and Rim Association publications should be addressed to the

Tire and Rim Association, Inc., 3200 W. Market Street, Akron, OH 44313.)

* 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein (except for associated detail specifications, specification sheets or

MS standards), the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific exemption has been

obtained.

3. REQUIREMENTS.

* 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.8, the vehicle, components, assemblies, and accessories to be delivered under the contract shall be standard or optional items, which meet or exceed the requirements of this specification. All chassis items shall be as represented in the chassis manufacturer's technical data, and special bodies or mounted equipment shall be as represented in the body and equipment manufacturer's