MIL-T-62021 Trucks, Pipe And Sewer Cleaner: High Pressure Water Jet Type, 5680 Liter 1,500 Gallon, 12 700 Kilograms 28,000 Pounds Gvw, 4X2, Modified CommercialThis specification covers diesel and gasoline engine driven, four-wheel, two-rear-wheel drive, 5680 liter L 1,500 gallon, high pressure water jet, pipe and sewer cleaner modified commercial trucks having a gross vehicle weight GVW of 12700 kilograms kg 28,000 pounds, for normal operating conditions. Vehicles procured under this specification are commercial items which are warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-T-62021E(AT)

*	(e)	Engine coolant temperature gage or high coolant temperature or low coolant level red indicator warning light
*	(f)	High coolant temperature or low coolant level alarm buzzer
	(g) (h)	Speedometer with recording odometer Ash receptacle
	(i) (j)	Dual sunvisors Driver's compartment ventilator other than window
	(k)	Tachometer.

When specified (see 6.2), an ammeter or voltmeter gage, oil pressure gage, and coolant temperature gage shall be provided in lieu of the indicators and buzzers specified above.

* 3.4.20 Rearview mirrors. Outside rearview mirrors shall be mounted on both sides of the cab. The mirrors shall have flat and convex areas. The flat portion shall have not less than

320 square centimeters (cm2) (50 square inches) of reflective area. The convex portion shall have

not less than 155 cm2 (24 square inches) of reflective area and a radius of curvature of not less than 510 mm (20 inches). The convex portion shall be attached to the lower mirror supporting

arm and shall not interfere with use of the flat mirror. The mirrors shall have not less than two supporting arms. When specified (see 6.2), the curbside flat mirror shall be of the motorized type,

with remote control. The mirror motor shall provide not less than 60 degrees horizontal rotational viewing range. When specified (see 6.2), the flat mirrors shall be electrically heated. Mirror

remote and heating controls shall be within reach of the seated driver.

* 3.4.21 Horn. The manufacturer's standard electric horn shall be furnished. When specified (see 6.2), in addition, and air operated horn shall be furnished.

3.4.22 Engine hour meter. An engine hour meter having a totalizing mechanism of not less than 9,999 hours shall be furnished for the chassis engine to register accurately the number of hours of operating time. The meter shall be of rugged construction to insure continuous trouble free performance under severe operating conditions. The engine hour meter shall be mounted on the cab instrument panel or in the engine compartment in a readable location.

3.4.23 AM/FM radio. When specified (see 6.2), the manufacturer's standard AM/FM

radio shall be provided.

3.4.24 Servicing and adjusting. Prior to acceptance of the vehicle by the Government inspector, the contractor shall service and adjust each vehicle and its mounted equipment for operational use including at least the following: alinement of lights, adjustment of the engine and brake systems; filling and charging of batteries; alinement of front wheels; inflation of all tires; complete lubrication of chassis, engine and running gear withgrades o£ lubricants recommended