MIL-T-2452 Trucks, Refuse Collection: Compaction Type, Rear Hopper Loading, With Tilt Cab, Diesel And Gasoline Engine Driven, 19,000 To 44,500 Pounds Gvw, 4X2 And 6X4, 10 To 25 Yard, CommercialThis specification covers diesel gasoline engine driven, 4-wheel, 2-rear wheel drive and 6-wheel, 4-rear wheel drive, commercial, compaction type, refuse collection trucks having a minimum gross vehicle weight GVW 19,000 to 44,500 pounds. The bodies shall be of 10- through 25-cubic yard minimum rated capacities with rear hopper loading. Vehicles procured under this specification are commercial items which shall be warranted by the manufacturer as specified in acquisition documents.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26

MIL-T-2452J

*	J551	- Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Devices
		(30-1000 MHz).
	J588 J589	- Turn Signal Lamps. - Turn Signal Switch.
	J682	- Rear Wheel Splash and Stone Throw Protection (DoD adopted).
	J688 J704	- Truck Ability Prediction Procedure (DoD adopted). - Openings for Six- and Eight-bolt Truck Transmission
	J1349	Mounted Power Take-Offs. - Engine Power Test Code - Spark Ignition and Diesel.

(Application for copies of SAE publications should be addressed to SAE, Inc.,

400 Commonwealth Drive, Warrendale, PA 15096.)

THE TIRE AND RIM ASSOCIATION, INC.

Yearbook

(Application for copies of Tire and Rim Association publications should be addressed to the Tire and Rim Association, Inc., 3200 W. Market Street, Akron, OH 44313.)

TRUCK BODY AND EQUIPMENT ASSOCIATION (TBEA) Hopper Capacity Ratings for Rear Loading Refuse Bodies.

* (Sources for copies of TBEA publications are not known. Use alternate publications if copies of TBEA publications are not on hand.)

* 2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein (except for associated detail specifications, specification sheets or MS standards), the text of this specification shall takes precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

* 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.6, vehicles, components, assemblies, and accessories to be delivered under the contract shall be the vehicle manufacturer's standard or optional items, which meet or exceed the requirements of this specification. All chassis items shall be as represented in the chassis manufacturer's technical data, and special bodies or mounted equipment shall be as represented in the body and equipment